NJDEP| Contaminated Site Remediation & Redevelopment Program | Emerging Contaminants (2024)

Contaminants of Emerging Concern

Contaminants of emerging concern are those chemicals that recently have been shown to occur in the environment and have been identified as a potential environmental or public health risk. New analytical capabilities have allowed scientists to identify chemicals in the environment in extremely low concentrations.

Contaminants of emerging concern are used in everyday products in our homes, on our farms, in our businesses, or by industry in commercial processes. These compounds are found in detergents, non-stick pans, stain-resistant and waterproof fabrics, fragrances, prescription and nonprescription drugs, disinfectants, and pesticides. Some of these contaminants are unintended byproducts from the manufacturing process, so it may not be obvious that these contaminants are in the products people are using.

To comply with the Technical Requirements for Site Remediation (N.J.A.C. 7:26E), all contamination, including all discharged hazardous substances, hazardous wastes, and pollutants, must be addressed. Contaminants of emerging concern, if discharged to the waters or onto the lands of the State, are pollutants that must be remediated using a Licensed Site Remediation Professional (LSRP) even if the contaminant is not a hazardous substance. When the site or area of concern under remediation is currently or was formerly occupied by facilities that manufactured, stored, handled, or used contaminants of emerging concern, LSRPs must consider these contaminants during the investigation and remedial action. LSRPs must evaluate the site for potential spills and releases through air, water, and waste discharges.

Per- and Polyfluoroalkyl Substances Background

Per- and polyfluoroalkyl substances (PFAS) have been used in a wide variety of industrial and commercial processes and products, including, but not limited to, electroplating and metal finishing (e.g., chromium plating), vapor/mist suppression, stain repellants, electronics, aerospace, automotive, insecticide/herbicides, adhesives/varnish/paints, as well as coatings for textiles (fabrics, upholstery, and carpeting) and paper.

Fluoropolymer manufacturing and facilities that used PFAS in industrial and commercial product manufacturing and fluorinated Aqueous Film Forming Foam (AFFF) are considered significant potential sources of PFAS. AFFF containing perfluorooctanesulfonic acid (PFOS) has been used to extinguish petroleum hydrocarbon fires. AFFF contamination has been identified at many locations where AFFF products were stored and discharged, including, but not limited to, airports, spill/crash sites, firefighter training facilities, refineries, and bulk petroleum storage facilities.

The scientific understanding of the toxicity, fate and transport, health effects, and analytical capabilities of PFAS are continuing to advance. PFAS are man-made chemicals that contain carbon and fluorine atoms of various chain length. PFAS are mobile, persistent, and soluble in water. Certain PFAS can be toxic and bioaccumulate in fish and/or humans when discharged into the environment. These contaminants at low levels can cause adverse health effects, as they persist (bioaccumulate) in the body for many years.

For additional general information, please see the links in the Additional Resources section below.

PFAS Standards, Criteria, and Guidance

Standards, criteria, and guidance are developed by the New Jersey Department of Environmental Protection (NJDEP) using assumptions that are protective for exposures over a lifetime. All measurements below are in nanograms per liter (ng/L) which is equivalent to parts per trillion (ppt).

Perfluorononanoic Acid (PFNA):

In July 2015, the New Jersey Drinking Water Quality Institute (DWQI) recommended a health-based maximum contaminant level (MCL) for perfluorononanoic acid (PFNA) of 13 ng/L. The DWQI is an advisory body to the NJDEP that is responsible for recommending MCLs in drinking water. This recommended MCL served as the basis for the interim specific ground water quality standard for PFNA of 10 ng/L established by NJDEP on November 25, 2015. The interim specific ground water quality standard was replaced by a permanent, specific ground water quality standard of the same value (10 ng/L) under amendments to the Ground Water Quality Standards regulations adopted on January 16, 2018. Concurrent adoption of amendments to the Discharge of Petroleum and Other Hazardous Substances regulations (N.J.A.C. 7:1E) added PFNA to the List of Hazardous Substances. For more information, visit: Bureau of Environmental Analysis, Restoration and Standards.

On August 7, 2017, NJDEP proposed amendments to the Safe Drinking Water Act Rules that include establishing a new MCL for PFNA of 13 ng/L. On September 4, 2018, the NJDEP adopted the MCL and concurrently amended the Ground Water Quality Standard for PFNA to 13 ng/L.

Perfluorooctanoic Acid (PFOA):

In 2007, NJDEP issued a preliminary drinking water guidance level for perfluorooctanoic acid (PFOA) of 40 nanograms per liter (ng/L). In March of 2017, the DWQI recommended an MCL for PFOA of 14 ng/L. In October 2017, the NJDEP issued an updated drinking water guidance value for PFOA and announced that the NJDEP would accept the DWQI recommended PFOA MCL of 14 ng/L.

On March 13, 2019, NJDEP established an interim specific ground water quality standard for PFOA of 0.01 ug/L (10 ng/L). The interim specific ground water quality standard for PFOA became effective upon posting to the “Table of Interim Specific Ground Water Quality Criteria (ISGWQC), Interim PQLs (IPQLs), and Interim Specific Ground Water Quality Standards (ISGWQS) for Constituents in Class II-A Ground Water” on the NJDEP website at Bureau of Environmental Analysis, Restoration and Standards.

For more information, visit: Perfluorooctanoic Acid (PFOA) in Drinking Water.

Perfluorooctanesulfonic Acid (PFOS):

In November 2017, the DWQI published draft recommendations for a health-based MCL for PFOS of 13 ng/L. In June of 2018, the NJDEP accepted the DWQI recommended PFOS MCL of 13 ng/L.

On March 13, 2019, NJDEP established an interim specific ground water quality standard for PFOS of 0.01 ug/L (10 ng/L). The interim specific ground water quality standard for PFOS became effective upon posting to the “Table of Interim Specific Ground Water Quality Criteria (ISGWQC), Interim PQLs (IPQLs), and Interim Specific Ground Water Quality Standards (ISGWQS) for Constituents in Class II-A Ground Water” on the NJDEP website at Bureau of Environmental Analysis, Restoration and Standards.

Frequently Asked Questions
  • Contaminants of Emerging Concern FAQ [pdf]
  • PFAS Handling Industry Sectors [pdf]
  • CECs Timeframes Existing Cases [pdf]
Additional Resources
NJDEP PFAS Studies
Some manufacturers that used the long-chain PFAS have replaced these chemicals with shorter-chained PFAS. For more information, please see:
Health information for PFAS:
Other Resources:
NJDEP| Contaminated Site Remediation & Redevelopment Program | Emerging Contaminants (2024)

FAQs

What is contaminant remediation? ›

Environmental remediation refers to the reduction or complete removal of contaminants and pollutants which may be from contaminated soil, water, or sediment. This procedure is carried out in order to protect people and the environment against the potentially harmful impact from exposure to pollutants and contaminants.

What is the first step in the remediation of contaminated sites? ›

Step One: Site Assessment and Evaluation

This step also helps identify any potential risks associated with these contaminants so that the appropriate clean-up measures can be taken.

What is the standard for PFOA in NJDEP? ›

Perfluorooctanoic Acid (PFOA):

In October 2017, the NJDEP issued an updated drinking water guidance value for PFOA and announced that the NJDEP would accept the DWQI recommended PFOA MCL of 14 ng/L. On March 13, 2019, NJDEP established an interim specific ground water quality standard for PFOA of 0.01 ug/L (10 ng/L).

What is environmental remediation of contaminated sites? ›

One of the simplest physical methods for remediation is by removing the contaminated soil and replacing it with clean soil. Essentially it is a dig, dump and replace procedure. Such a method is practically possible only if the spatial extent and depth of the contaminated region is small.

What are the three types of remediation? ›

Although each site remediation firm undertakes varying projects, they all converge into three main types of site remediation: soil, water, and sediment. Each type serves a particular purpose, but they all help to improve the conditions of many polluted sites.

What is remediation of contaminated land? ›

Cleaning up land contamination is known as remediation. It is the action required to ensure that land contamination is no longer a risk to human health or the environment.

What is considered a contaminated site? ›

A contaminated site is a location where hazardous substances, including petroleum products have been improperly disposed, spilled, or leaked from their containers. Contaminated sites often threaten public health or the environment and can cause economic hardship to people and communities.

How does remediation work? ›

Remediation is also colloquially known as “re-teaching,” as it assumes that the student has been introduced to concepts previously but has not yet mastered them. Remediation enables teachers to spot blind spots in students' learning and quickly assess and correct them.

What is a remediation procedure? ›

Remediation is the process of removing contaminants from sites that have been polluted from industrial, manufacturing, mining, and commercial activities.

What is the maximum contaminant level in New Jersey? ›

In 2018, New Jersey became the first state to establish an enforceable standard for PFAS in drinking water. The state set a maximum contaminant level of 13 ppt for PFNA and PFOS, and 14 ppt for PFOA.

Is PFOA in bottled water? ›

Does bottled water contain PFAS? PFAS have been found in some brands of bottled water. The Food and Drug Administration (FDA) has not put enforceable limits in place yet.

Are PFOA and PFOS the same thing? ›

What are PFOA and PFOS? Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) are part of a large group of lab-made chemicals known as perfluoroalkyl and polyfluoroalkyl substances (PFAS). Some of these chemicals have been in commercial use since the 1940s.

How do you identify a contaminated site? ›

A desk top study which is a review of the history and environmental setting of the site. A site walkover which identifies the current condition and use of the site. Any possible contaminant linkages that could be present depending on the current or proposed use if the site is going to be developed.

What are two hazardous waste on site remediation technologies? ›

Examples of innovative technologies are vacuum extraction, bioremediation, soil washing/flushing, chemical extraction, chemical destruction, and thermal desorption.

How to remediate a site? ›

Many contaminated site remediation projects follow a 4-stage process, as outlined below.
  1. Stage 1: Preliminary site investigation.
  2. Stage 2: Intrusive on-site investigation.
  3. Stage 3: Remediation works.
  4. Stage 4: Verification and validation.
  5. Excavation or dredging.
  6. Pump and treat.
  7. Solidification and stabilisation.
Mar 17, 2022

What does remediation mean on a test? ›

Remediation is the process by which students address and rectify a failure in a required block, course, or a lack of competency in one of the threads.

What does remediation mean in real estate? ›

Remediation stands quite apart from restoration. This term applies to the thorough removal of pollutants or other potential contaminants from various types of location, to ensure ongoing safety.

What is remediation examples? ›

Remediation is a word for fixing things that aren't right. You often hear about criminals needing rehabilitation, which is close to remediation: after remediation, you're a better or smarter person. Students who get to college but aren't quite ready for college work need remediation.

Top Articles
Latest Posts
Article information

Author: Pres. Lawanda Wiegand

Last Updated:

Views: 6389

Rating: 4 / 5 (51 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Pres. Lawanda Wiegand

Birthday: 1993-01-10

Address: Suite 391 6963 Ullrich Shore, Bellefort, WI 01350-7893

Phone: +6806610432415

Job: Dynamic Manufacturing Assistant

Hobby: amateur radio, Taekwondo, Wood carving, Parkour, Skateboarding, Running, Rafting

Introduction: My name is Pres. Lawanda Wiegand, I am a inquisitive, helpful, glamorous, cheerful, open, clever, innocent person who loves writing and wants to share my knowledge and understanding with you.